SAPIM "Race" 14G Spoke | Silver 256mm

SKU: SAPRACESLV-0006
Category: Spokes
Manufacturers: SAPIM

Length:

Choose tax zone / country of delivery

0,70 €

incl. 19% VAT , plus (Paket)

Available
Delivery time: 19 - 21 Workdays (DE - int. shipments may differ)

Please note the minimum purchase quantity of 28 Units.

Description
Reviews

SAPIM Race spokes - one of the most versatile and widely used spokes with double butting for high tensile strength with low torsion. The tapered center section allows the SAPIM Race to absorb load peaks well and is long lasting. SAPIM Race spokes are DD (double-thickend) stainless steel spokes. Conified spokes from Sapim offer two key advantages: they are lighter and yet stronger. A special cold forging process preserves the linear molecular structure of the material and increases the strength of the thinner middle section by at least 48%. Conified spokes feature a tapered, springy center section. This enables the spokes to absorb short-term high loads. Spoke heads, hub flanges and nipple seats are protected in this way. Standard SAPIM Race spokes have a J-shaped bend at the head. It is the most commonly used design for bicycle spokes. In addition to the common designation "J-bend" or "J", "cranked", "curved", "curved head" or "curved neck" are also common.

Manufacturer: Sapim
Model: Race 14G
version/diameter: 14G/conified (2/1,8/2)
profile: round
Spoke head: J-Bend
Color: Silver
Material: chrome-nickel steel 18/8, stainless steel
Intended use: Allround
Suitable for disc wheels: Yes
maximum load cycles: 980,000
tensile strength in the middle section: 1300 N/mm2
at least 48% higher stiffness in the middle part
various lengths (in 2mm steps)
weight: approx. 5,7gr per spoke (at 260mm length)
spoke nipples are not included in delivery
Minimum purchase (except for the option wheel building): 28 pieces

To calculate the necessary spoke length, please use the following formula for each side of the wheel:

It is easier with one of the numerous spoke calculators on the Internet. We at BIKE PUNK recommend THIS one. The necessary dimensions are shown there quite simple and easy and understandable without greater prior knowledge. If you want a wheel that is professionally spoked and centered by us, put the desired hub, rim and spoke-nipples in the appropriate quantity in the shopping cart, select the "item" wheel-building and select here for the spokes as a desired length the "option wheel construction" in the appropriate quantity. We then calculate the necessary length for your custom wheel.

For special individual custom wheels with components beyond our standard offer or even components brought by you, contact us by mail. We will then decide on a case-by-case basis and depending on the availability of the components and our capacities. Please understand that the wheel construction can take several weeks, especially in the Season!

There are no reviews yet.